FISCHER ENGINEERING TENATIVE MACHINE SHOP EQUIPMENT INVENTORY

FISCHER ENGINEERING
TENATIVE MACHINE SHOP EQUIPMENT INVENTORY (Lots 800-902)

800) SUNNEN CYN. HEAD WET BENCH HS60K, BENCH ONLY. USED AS LIFTER BORE HONE AND GALLEY HONE. THIS BENCH WAS USED TO FINAL HONE LIFTER BORES AND OIL GALLEYS. IT HAS A CUSTOM MADE RACK TO SUPPORT BLOCKS. THERE WILL ALSO BE A WIDE VARIETY OF "BALL" HONES WITH THE BENCH.

801) MASTER TOOL CRANK STROKE CHECKER (FAIR SHAPE)

THIS NICE SIMPLE TOOL WILL ALLOW YOU TO CHECK YOUR CRANKSHAFT STROKE AND ALSO ALLOWS YOU TO CHECK RUN OUT ON THE MAIN JOURNALS

802) TN111 SUNNEN ROD ALIGNING FIXTURE. JUST A SIMPLE TOOL TO CHECK YOUR PISTON AND ROD ASSEMBLIES FOR SQUARE.

803) MITUTOYO 0-12" DEPTH MICROMETER SET. STILL IN IT’S ORIGINAL WOODEN BOX AND IN GREAT SHAPE. IT WAS USED MAINLY TO MEASURE DECK HEIGHTS.

804) LISTA STORAGE CABINET, THIS IS A 28-1/2x28-1/2x44" CABINET WITH 5 GOOD SIZE DRAWERS AND A RUBBER MAT TOP COVER.

804A) LISTA STORAGE CABINET, THIS IS A 28-1/2x28-1/2x44" CABINET WITH 4 GOOD SIZE DRAWERS AND A RUBBER MAT TOP COVER

805) CRANKSHAFT POLISHER, JUST A BASIC ALUMINUM FRAME CRANK POLISHER STILL WORKS WELL AND COMES WITH A COUPLE OF EXTRA BELTS.

806) MITUTOYO DIAL HEIGHT GAUGE 0 to 24"X.001. AN EXCEPTIONAL MEASURING TOOL WHICH WILL ALLOW YOU TO MEASURE HEIGHTS FROM .001 to 24".

807) SUNNEN GA2121 DIAL BORE GAUGE 2-6"X.0001. THIS IS THE STANDARD LENGTH VERSION NORMALLY USED FOR BLOCK CYLINDER BORES AND IS IN GREAT CONDITION.

808) MITUTOYO 8-9" OUTSIDE MICROMETER WITH RADIUS TIP ATTACHMENT. VERY LITTLE USAGE AND STILL IN THE ORIGINAL WOODEN CASE WITH A STANDARD.

809) MAGIDO STAINLESS WASH TANK-HEATED (NOT PRESENTLY BEING USED) THIS ANOTHER VERY NICE STAINLESS STEEL TANK THAT WAS USED FOR FINAL CLEANING WITH HEATED MIRACHEM SOLUTION IN IT BUT CAN ALSO BE USED A STANDARD SOLVENT TANK.

810) MIRACHEM 2032 PARTS WASHER-HEATED. THIS IS A VERY NICE HEATED SOLVENT STYLE TANK THAT WE USED WITH MIRACHEM IN IT TO FINAL CLEAN INTERNAL ENGINE PARTS AND CYLINDER HEADS BEFORE FINAL ASSEMBLY. IT ALSO MAKES A GREAT CYLINDER HEAD PRESSURE CHECKING TANK.

811)MIKITA CHOP SAW, A NICE ABRASIVE WHEEL "SAW" MOUNTED TO IT’S OWN CART AND READY TO GO.

812) DAKE 25 TON HYDRAULIC PRESS WITH A DAKE ARBOR PRESS ATTACHED ON THE SIDE (ARBOR PRESS NEEDS A HANDLE.) THIS IS AN OLDER PRESS WITH AN ADJUSTABLE TABLE AND MADE IN AMERICA WITH QUALITY STEEL.

813) DAYTON DRILL PRESS. JUST A GOOD OLD DRILL PRESS WITH AN ADDED STEEL TABLE ON TOP.

814) SONIC TESTER BHJ (NEEDS A BATTERY) THE BHJ CHECKER IS AN OLDER MODEL THAT IS IN NEED OF A NEW BATTERY (AVAILABLE FROM BHJ). IT HAS A LONG AND SHORT PROBE.

815) WINONA VAN NORMAN PH6000A SEAT AND GUIDE MACHINE.   THIS MACHINE IS A REAL WORK HORSE IT HAS BEEN USED FOR AL SORTS OF DIFFERENT CYLINDER HEAD MACHINING OPERATIONS, WITH IT’S LARGE SUPPORT SHAFT AND VARIABLE SPEED MOTOR IT HAS ALWAYS COME THROUGH. THIS MACHINE HAS STANDARD TOOLING TO CUT FOR SEAT REPLACEMENT AND TO BORE FOR REPLACEMENT GUIDES. ALSO AT THE AUCTION WILL BE A WIDE VARIETY OF SPRING PAD AND GUIDE CUTTERS. THERE WILL ALSO BE A MIRA SEAT CUTTER SYSTEM AVAILABLE FOR THIS MACHINE.

816) BROWN AND SHARPE 15-16" OUTSIDE MICROMETER WITH STANDARD. USED ONLY ONE TIME FOR A SPECIAL PROJECT, IT IS IN "AS NEW" CONDITION.

817) JIB CRANE, FLOOR MOUNTED, WITH TROLLEY AND DAYTON 500LB WINCH.

818) BALDOR TOOL SHARPENER 1/2hp W/PEDESTAL

VERY NICE TOOL POST SHARPENER WITH BOTH A WHITE, GREEN STONE WHEEL AND A DIAMOND WHEEL. IT HAS AN ADJUSTABLE TABLE FOR ANGLE CUTS AND A DIAMOND DRESSER.

819) STARRETT REAL GRANITE SURFACE PLATE 24x18" AND VERY HEAVY. ONLY USED IN OUR INSPECTION AREA AND VERY WELL TAKEN CARE OF.

820) SUNNEN "NEW" LB600 CYLINDER HONE MANDREL FOR THE LBB1660 ROD HONE. HAVE YOU GOT SINGLE CYLINDERS TO HONE? THIS IS WHAT YOU NEED, MOUNTS IN YOUR ROD HONE AND USES STANDARD CK OR CV HONING STONES TO HONE THOSE AIR COOLED STYLE CYLINDERS.

821) ELLIS HORIZONTAL/VERTICAL MITER BANDSAW. ANYONE THAT HAS USED AN ELLIS BAND SAW KNOWS HOW GREAT THESE MACHINES ARE. HAS A PROTRACTOR STYLE BASE SO YOU CAN DO ANGLE CUTS AS WELL AS SQUARE CUTS. THIS IS THE 110V VERSION SO YOU CAN PLUG IT IN ANYWHERE. IT HAS NEVER BEEN ABUSED OR MIS-USED.

822) BHJ PV1B PISTON VICE. THIS IS A NICE LOW USAGE FIXTURE. IT HAS ANGLE ADJUSTMENT AND ROTATIONAL ADJUSTMENT WITH A SECURE LOCK DOWN SYSTEM. CAN BE ADJUSTED FROM 0 DEGREES AND UP SO YOU CAN DECK PISTONS AS WELL AS MACHINE YOUR VALVE RELIEF’S.

823) SUNNEN DIAL BORE GAUGE GR2241 2-6"X.0001. THIS IS THE LONG VERSION PRIMARILY USED FOR MAIN LINES AND CAM TUNNELS. IN GREAT CONDITION.

824) LISTA ROLL AROUND WOODEN TOPPED WORK STATION. A VERY NICE HEAVY DUTY WORK STATION WITH LOCKING WHEELS AND SIDE LOCK DRAWERS. THE TOP IS A THICK BUTCHER BLOCK WOOD WHICH IS GREAT TO WORK ON.

825) COMPLETE ZYGLO STATION. THIS IS A VERY NICE SYSTEM; IT HAS A SOAK TANK, RINSE TANK, HOT AIR DRYING CHAMBER AND A COOL DOWN AREA. COMES COMPLETE WITH EXTRA DYE AND A BLACK LIGHT.

826) PAINT SPRAY BOOTH – FILTERED. THIS HAS TURNED OUT TO BE ONE OF THE NICEST ADDITIONS TO THE SHOP. IT IS JUST THE RIGHT SIZE TO PAINT ANY OF OUR PROJECTS WITHOUT TAKING UP TO MUCH ROOM. IT HAS A DUAL FILTER SYSTEM, WHICH HAS PLENTY OF DRAW TO KEEP OVER SPRAY OFF THE FLOOR AND KEEP THE SHOP VAPOR FREE. THE FILTERS USED ARE EASILY CHANGED AND INEXPENSIVE.

827) FRESH CHEV. SB/2.2 SHORT BLOCK. BUILT WITH A PROFESSIONALLY LIGHTENED "CG" BOWTIE BLOCK. IT HAS A 55mm CAM TUNNEL, COMP. CAM, AND JESEL LIFTERS, PLUS A JESEL BELT DRIVE. TOTAL SEAL RING PACKAGE WITH CARRILLO RODS.

828) SUNNEN VR7000K VALVE RE-FACER. THIS IS AN EXCEPTIONAL VALVE FACING MACHINE; IT HAS BEEN VERY LIGHTLY USED, MAINLY FOR TITANIUM. IT COMES WITH VALVE TIP MACHINING ATTACHMENT AND EXTRA DIAMOND DRESSERS.

829) MAGIDO STAINLESS SPRAY WASHER (NOT PRESENTLY BEING USED.) THIS IS AN OUTSTANDING LOW PROFILE SPRAY WASHER, THIS WAS BEING USED FOR FINAL CLEANING BEFORE ASSEMBLY. IT HAS A LOW LOAD HEIGHT FOR EASY ACCESS AND SPRAY BARS TOP AND BOTTOM. BEING STAINLESS YOU DO NOT EVER HAVE TO WORRY ABOUT RUST ISSUES.

830) SUNNEN CK100K ALIGN HONE, COMES WITH A 2400 MANDREL. VERY NICE CONDITION SUNNEN ALIGN HONE THAT HAS NEVER BEEN ABUSED, IT HAS SEVERAL CUSTOM MADE HOLD-DOWNS TO SECURE BLOCKS WITHOUT CAM TUNNELS OR IF YOU ARE HONING CAM TUNNELS THEMSELVES. THIS MACHINE HAS AN ATTACHMENT TO ACCEPT AN OVERHEAD HOIST/CRANE SYSTEM ON THE MACHINE ITSELF WHICH WILL BE PART OF THE AUCTION.

THE FOLLOWING ALIGN HONE MANDRELS WILL ALSO BE AVAILABLE;
831) 1800 MANDREL
832) 2100 MANDREL
833) 2400 MANDREL
834) 2700 MANDREL
835) 3000 MANDREL
836) SUNNEN MANDREL RACK FOR STORING THE ALIGN HONE MANDRELS.

837) LUXMATTER LATHE 330H. A GENERAL PURPOSE LATHE, IT HAS A QUICK CHANGE TOOL HOLDER AND A TAILSTOCK WITH A LIVE CENTER. ALSO IT HAS A PROTRACTOR ADJUSTMENT ON THE CROSS-FEED TO CUT AT AN ANGLE.

838) #1 STORM VULCAN 85B BLOCKMASTER WITH BLOCK AND HEAD TOOLING INCLUDING A STANDARD SQUARE BAR FOR BLOCK SUPPORT/ ALIGNMENT. THIS IS ONE OF 2 BLOCKMASTERS AVAILABLE; THIS MACHINE HAS MAINLY BEEN USED TO SURFACE ALUMINUM HEADS. THE CUTTING WHEEL HAS BEEN SHARPENED LESS THAT 2 YEARS AGO AND HAS HAD MINIMAL USE SINCE.

839) BRIDGEPORT MILL" A" WITH RISER. THERE WILL BE 2 TRUE BRIDGEPORT MILLS AVAILABLE AT THE AUCTION WITH RISER RINGS INSTALLED SO THAT THE MILL CAN CLEAR ENGINE BLOCKS. BOTH OF THESE MACHINES ARE STILL IN GREAT SHAPE. THIS ONE IS EQUIPPED WITH A MITUTOYO DRO. AS WELL AS A POWER CROSS FEED.

840) #2 STORM VULCAN 85B BLOCKMASTER WITH BLOCK AND HEAD TOOLING INCLUDING A PREMIUM 2" ROUND BAR FOR BLOCK SUPPORT/ ALIGNMENT. THIS MACHINE HAS MAINLY BEEN USED TO SURFACE CAST IRON BLOCKS. IT HAS WITH IT CENTERING RINGS TO ALIGN THE 2" BAR WITH THE CENTERLINE OF THE MAIN SADDLES. THIS IS THE MACHINE THAT WAS USED WITH THE BHJ DECK TRU FIXTURE FOR SQUARE DECK MACHINING. THIS IS A VERY NICE LOW USAGE PIECE.

841) FRESH CHEV. SB/2.2 SHORT BLOCK. BUILT WITH A PROFESSIONALLY LIGHTENED "184" BOWTIE BLOCK. IT HAS A 50mm CAM TUNNEL, COMP. CAM, AND JESEL LIFTERS, PLUS A JESEL BELT DRIVE. READY FOR YOUR CHOICE OF SB/2.2 CYLINDER HEADS.

842) COMPLETE NASCAR/ARCA D-3 HEADED FORD ENGINE. THIS IS AN ALL NEW FORD ENGINE FROM THE INTAKE TO THE PAN, NOTHING BUT THE BEST. WAS DYNO’D WITH BOTH A NASCAR LEGAL 390 AND 830 CARBURETOR WITH IMPRESSIVE RESULTS.

843) HINES HC500 CRANKSHAFT BALANCER W/V6&V8 BOBWEIGHTS AND HEAVY METAL TOOLING AVAILABLE. THIS IS A DELUXE HINES BALANCER COMPLETE WITH A COLOR SCREEN MONITOR AND A PROGRAM THAT ALLOWS YOU TO FIGURE WEIGHT REMOVAL AND CALCULATES THE DRILL DEPTH, PLUS STORE INDIVIDUAL BOB WEIGHTS. THE MACHINE COMES WITH AN ATTACHED DRILL PRESS FOR QUICK WEIGHT REMOVAL. ALSO AVAILABLE WILL BE V6 AND V8 BOB WEIGHTS AS WELL A COMPLETE SET OF TOOLING TO MACHINE FOR, AND ADD HEAVY METAL TO YOUR CRANKSHAFT. AN ELECTRONIC SCALE AS WELL AS TOOLING TO REMOVE MATERIAL FROM YOUR PISTONS IS ALSO AVAILABLE.

844) LARGE MAGNAFLUX MACHINE TAQ-1446-G. THIS IS A MAGNAFLUX MACHINE THAT CAN DO EVERYTHING YOU NEED IT TO DO. IT HAS A 6’+ WORKING BED, COMES WITH BOTH SLIDING END CONTACTS AND A LARGE CENTRAL RING. LARGE ENOUGH TO PUT A COMPLETE ENGINE BLOCK IN. COMES COMPLETE WITH INTEGRATED WORKBENCH AND A BLACK LIGHT.

845) SUPERFLOW 902 ENGINE DYNO-COMPLETE PACKAGE- THIS DYNO HAS A TON OF ADDED FEATURES THE FIRST IS THE INNOVATION ENGINEERING DRIVE EXTENSION. MOVING THE BELLHOUSING OUT GIVES YOU A LOT OF FLEXIBILITY, NOT TO MENTION A REVERSE MOUNT STARTER SO YOU DO NOT HAVE TO USE ONE MOUNTED TO THE BLOCK. ALL THE FLUID AND ELECTRICAL HOOK UPS HAVE BEEN EXTENDED OUT FROM THE DYNO MAIN FRAME. THE OIL HEAT EXCHANGER IS MOUNTED BELOW THE UNIT AND HAS A BLEND VALVE TO ADJUST HOW MUCH OIL GOES THROUGH THE COOLER. THE DYNO IS NOW EQUIPPED WITH A LOW AND HIGH PRESSURE FUEL SYSTEM WITH SEPARATE FLOW METERS. THE CONTROL BOX HAS BEEN EXTENDED UP AND OUT OF THE WAY OF THE DYNO ITSELF. THE COOLING TOWER HAS BEEN MOVED TO THE FORWARD WALL AWAY FROM THE FRONT OF THE DYNO. THERE IS A SURGE TANK FOR THE FUEL SYSTEM AND THE OIL TANK IS MOUNTED TO THE REAR OF THE MAIN FRAME SO IT IS OUT OF THE WAY. THERE ARE WATER PUMPS, A FUEL TANK AND MUFFLERS, ALL AVAILABLE AS A PACKAGE. WORDS DO NOT DO THIS DYNO JUSTICE, YOU REALLY NEED TO TAKE A LOOK FOR YOURSELF. (NOTE-ROOM CONTROL (LIGHTS,FANS, ETC) STAY W/BUILDING)

845A) SUPERFLOW 902 ENGINE DYNO-(IF NOT SOLD AS PACKAGE), WITHOUT ACCESSORIES/PLUMBING/PUMPS/ETC.

846) SERTI 100 SEAT AND GUIDE MACHINE W/TOOL SHARPENER ALTHOUGH THIS IS AN EARLY SERTI IT STILL HAS ALL THE PRECISION SERTI HAS BEEN KNOWN FOR. PLENTY OF CARBIDE PILOTS (APPROX. 50, MISC. HSS PILOTS, 15+ TOOL HOLDERS, BOTH OLD AND NEW STYLE CUTTER HOLDERS. THERE ARE APPROX. 100 CARBIDE SEAT CUTTERS IN SINGLE AND MULTI ANGLE CONFIGURATION. PLUS A KEYLESS CHUCK AND EXTRA TOOLING.

847) THIS IS A LISTA 2 CABINET WORK BENCH IT HAS A 3 DRAWER 17" WIDE CABINET AND A 7 DRAWER 28" WIDE CABINET. PLUS A NICE THICK BUTCHER BLOCK TOP.

848) THIS IS AN EXTRA CUTTING WHEEL WE HAVE FOR AN 85B BLOCK MASTER SURFACER. USED AS A BACK UP, IT IS NOT FRESHLY SHARPENED BUT IN GOOD SHAPE.

849) THIS IS AN 11 DRAWER LISTA CABINET WHICH MEASURES 28-1/2x28-1/2x44" AND HAS RUBBER MAT TOP COVER.

850) SUNNEN CV616D CYN. HONING MACHINE. THIS HONE MACHINE IS IN EXCELLENT CONDITION, IT HAS NEVER BEEN ABUSED AND HAS ONLY BEEN USED FOR RACE RELATED WORK. THE MACHINE WILL COME WITH A STD. HONE HEAD BUT A JUNIOR HEAD WILL BE AVAILABLE AT THE AUCTION. ALONG WITH THE STANDARD GUIDES AND STONE HOLDER THERE WILL BE AVAILABLE A LARGE SUPPLY OF DIFFERENT STONES, SHOES AND MANY SPARE PARTS FOR THE MACHINE . ONE ADDED FEATURE IS THAT SEVERAL "CENTERING"RINGS HAVE BEEN MADE FOR THE HOLD DOWN BAR TO KEEP THE BLOCK CENTERED IN THE HONE. THIS MACHINE HAS AN OVERHEAD HOIST ATTACHED TO THE MACHINE.

851) SUNNEN LB1660 ROD HONE WITH AN AG300 GAUGE, THIS IS PRETTY MUCH THE STANDARD OF THE INDUSTRY, AS ALWAYS IT HAS WORKED FLAWLESSLY. IT WAS BOUGHT IN 1997 AND HAS ALWAYS BEEN USED FOR RACE PARTS. COMES COMPLETE WITH AN AG-3OO GAUGE. THERE WILL BE 11+ CR MANDRELS, 35 SMALL MANDRELS ML/PL/KL. WITH SPARE, PARTS STONES AND SHOES WILL ALL BE AVAILABLE AT THE AUCTION.

852) SUNNEN CRG-600, THIS IS A STORAGE CABINET AND WORK STATION FOR LB-1660 ROD HONE, IN EXCELLENT SHAPE AND READY TO GO.

853) BRIDGEPORT STD HEIGHT MILL WITH SONY DRO. THIS IS A LATE MODEL BRIDGEPORT THAT HAS BEEN MAINLY USED FOR CYLINDER HEAD RELATED MACHINE WORK. REALLY IS IN EXCELLENT SHAPE. IT HAS A SONY DRO AND A BRIDGEPORT POWER CROSS FEED.

854) LISTA "MILL" TOOLING CABINET. THIS EXCELLLENT CABINET IS MADE TO COMPLEMENT THE MILL OR LATHE WORKING AREA WITH NUMOROUS DRAWERS AND PULL OUT SHELVES FOR HEAVY PULL OUT ITEMS.

855) ROTTLER F2MB BORING BAR,   THIS BORING BAR IS EQUIPPED WITH AIR LOCK BAR AND HAS HEIGHT ADJUSTMENT FOR THE SUPPORT BAR.EXTRA TOOLING INCLUDES DIAL INDICATORS TO CHECK BORE CENTERS AND PARALLEL TO THE DECK. ALSO AVAILABLE IS A WIDE VARIETY OF CUTTING BITS AND "O"RING TOOLING. ALSO INCLUDED IS A ROTTLER TOOL BIT SHARPENER.

856) TOBIN ARP TA-14 ALIGN BORE MACHINE. THIS TOBIN ARP MACHINE IS STILL THE BEST MANUAL MACHINE ON THE MARKET. INCLUDED WITH ARE A TOTAL OF 6 BAR SUPPORT ARMS MAKING CAM TUNNEL AND MAIN BORING, RIGID AND TRUE. THE MACHINE COMES WITH SEVERAL DIFFERENT LENGTH BORING BARS, NUMEROUS TOOL BITS AND TOOLING TO MACHINE THRUSTS. ALSO AVAILABLE IS THE ALIGNMENT FIXTURES AND SPARE BUSHINGS FOR THE SUPPORT ARMS.

857) ULTRASONIC CLEANER PRO3627. THIS IS NICE LARGE CAPACITY MACHINE, HOLDING TANK CAN ACCEPT AN ENGINE BLOCK WITH OUT A PROBLEM. COMES WITH EXTERNAL FILTER AND ATTACHED OIL SKIMMER. EXTRA CHEMICAL IS ALSO UP FOR AUCTION.

858) BRIDGEPORT MILL "B" WITH RISER RINGS INSTALLED SO THAT THE MILL CAN CLEAR ENGINE BLOCKS. MACHINE IS IN GREAT SHAPE. THIS ONE IS EQUIPPED WITH AN ANLAM DRO AS WELL AS A POWER CROSS FEED.

859) LISTA "MILL" TOOLING CABINET. THIS EXCELLLENT CABINET IS MADE TO COMPLEMENT THE MILL OR LATHE WORKING AREA WITH NUMEROUS DRAWERS AND PULL OUT SHELVES FOR HEAVY PULL OUT ITEMS.

860) ZERO PULSAR III GLASS BEADER W/RECLAIMER. SIMPLY THE BEST GLASS BEADER ON THE MARKET, IT HAS A LARGE CABINET AND RECLAIMER WITH AN EXCEPTIONALLY LOW CFM DRAW, YOU RARELY NEED TO USE MORE THAN 40psi TO GET THE JOB DONE. HAS NOT HAD HEAVY USE MAINLY USED FOR SMALL PARTS AND LIGHT CLEANUP.

861) SUNNEN AG-3OO I.D. MEASURING GAUGE WITH A MOUNTING BRACKET. THIS IS THE BACKUP UNIT FOR ROD MACHINE AND STILL IN EXCELLENT SHAPE. IT COMES COMPLETE WITH SMALL AND REGULAR MEASURING POINTS.

862) AXE HOT TANK/PARTS WASHER. VERY STRAIGHT FORWARD HOT TANK HAS A GUSHER PUMP, WITH MULTIPLE SPRAY BARS. LOWER SUMP CAN BE USED AS A SOAKER TANK AND IT HAS A REMOVABLE LOWER BASKET. IT ALSO COMES WITH AN ATTACHED HOIST TO LOAD BLOCKS IN.

863) COMPLETE SB/2.2 NASCAR/ARCA OR? SMALL BLOCK CHEVY ENGINE. THIS ENGINE HAS 17 MILES SINCE IT WAS REBUILT, WAS BUILT WITH ALL THE BEST PARTS, INCLUDING NEW PISTONS, RINGS AND BEARINGS.

864) LISTA STORAGE CABINET, THIS IS A 28-1/2x28-1/2x44" CABINET WITH 4 GOOD SIZE DRAWERS AND A RUBBER MAT TOP COVER.

865) QUINCY 220 OVEN 150-550DEG. 24X24". THIS IS AN EXCELLENT KILN STYLE OVEN. THAT WE HAVE USED MAINLY TO PRE HEAT CAST IRON AND ALUMINUM PARTS TO EITHER INSTALL SEATS & GUIDES OR PREP FOR WELDING. IT EVEN DOES A GREAT JOB DRYING PAINT AND EPOXY.

866) HOBART COMMERCIAL DISHWASHER. THIS IS ONE MACHINE NO SHOP SHOULD BE WITHOUT. WORKS EXCELLENT FOR FINAL CLEANING PARTS BEFORE ASSEMBLY. ALSO TO REMOVE MAGNAFLUX AND ZYGLO SOLUTIONS. COMES COMPLETE WITH CUSTOM STAINLESS TRAYS ON BOTH SIDES OF THE MACHINE.

867) TURNMASTER LATHE 1530 WITH 5C COLLET ATTACHMENT.   THIS IS A BIG HEAVY DUTY LATHE; IT HAS A 5C COLLET CLOSURE SYSTEM WITH COLLETS OF DIFFERENT SIZES, FROM 7MM UP TO A SPECIAL COLLET MADE TO HOLD MAIN BEARINGS FOR NARROWING AND CHAMFERING. ALSO AVAILABLE IS A SET OF JAWS MATCHED THE LATHE FOR HOLDING PISTONS IN THE OIL RING LAND AND HAS EXTRA UNMACHINED JAWS. THIS LATHE ALSO HAS A TAILSTOCK WITH A LIVE CENTER AS WELL AS A STEADY REST.

868) BHJ BLOCK TRU FIXTURE. COMES WITH 45deg PLATE AND CENTERING CONES FOR THE CAM HOUSING ALL YOU HAVE TO DO IS ADD YOUR 2" MAIN BAR AND ALL THREAD FOR THE CAM HOUSING CENTERING CONES.

869) SUNNEN SETTING FIXTURE FOR SETTING DIAL BORE GAUGES FROM THE 0-2" RANGE COMES COMPLETE WITH TIPS AND AN ENCLOSED CASE.

870) A BRAND NEW SUNNEN CK2610 "JUNIOR" HONING HEAD FOR EITHER A CK-10 OR CV-616. IF YOU NEED A HONING HEAD FOR THOSE SMALLER BORES THIS IS YOUR TOOL.

871) LISTA ROLL AROUND WOODEN TOPPED WORK STATION. A VERY NICE HEAVY DUTY WORK STATION WITH LOCKING WHEELS AND SIDE LOCK DRAWERS. THE TOP IS A THICK BUTCHER BLOCK WOOD WHICH IS GREAT TO WORK ON.

872) SUNNEN HS60K CYN. HEAD WORK STATION . THIS STATION HAS BEEN USED TO DO OUR ENTIRE VALVE GUIDE FITTING. THERE IS A GOOD SELECTION OF DIAMOND HONES AS WELL AS CONVENTIONAL P180 GUIDE HONES IN 7mm, 5/16, 11/32, & 3/8" THAT WILL BE AVAILABLE AT THE AUCTION WITH TONS OF SPARE PARTS.

873) PARKER DRY MAG SYSTEM. THIS IS NOT YOUR TYPICAL AUTOMOTIVE DRY MAG. THIS IS A PREMIUM INDUSTRIAL UNIT THAT HAS BOTH A/C AND D/C SETTINGS. COMES COMPLETE WITH EXTRA POWDER.

874) SUNNEN DIAL BORE GAUGE GR2241 2-6"X.0001. THIS IS THE LONG VERSION PRIMARILY USED FOR MAIN LINES AND CAM TUNNELS, IN GOOD CONDITION.

875) SUNNEN GA2121 DIAL BORE GAUGE 2-6"X.0001. THIS IS THE STANDARD LENGTH VERSION NORMALLY USED FOR BLOCK CYLINDER BORES AND IS IN GREAT CONDITION.

876) THIS IS A SUPERFLOW HEAT EXCHANGER/ WATER TOWER COMPLETE WITH A PRESSURIZED SURGE TANK. ALSO INCLUDED IS AN OVERHEAD BOOM WITH THE UPPER RADIATOR HOSE AND A CROSS FLOW VALVE. BONUS IN THE PACKAGE WILL BE A FLOAT FED FUEL TANK COMPLETE WITH FEED LINES.

877) LISTA WORK STATION WITH OVERHEAD CABINETS. THIS IS A NICE COMPLETE WOODEN TOPPED WORKSTATION WITH A BUTCHER BLOCK TOP 2 SETS OF DRAWERS AND 3 OVERHEAD CABINETS.

878) THIS IS ANOTHER LISTA WORK STATION WITH OVERHEAD CABINETS. THIS IS A NICE COMPLETE WOODEN TOPPED WORKSTATION WITH A BUTCHER BLOCK TOP 2 SETS OF DRAWERS AND 3 OVERHEAD CABINETS.

879) THIS IS ANOTHER STYLE OF LISTA CABINET WHICH IS COMPLETE WITH WIRED IN POWER STRIPS AND BUILT IN LIGHTING. AS WITH ALL THE LISTA WORK BENCHES IT HAS A BUTCHER BLOCK WOODEN TOP. THE CABINETS INCLUDED ARE 1 SEVEN DRAWER 28" WIDE AND 1 FOUR DRAWER 28" WIDE.

880) DYNO JET CHASSIS DYNO. THIS IS A BELOW GROUND DYNO JET CHASSIS DYNO THAT IS COMPLETE AND READY TO INSTALL. IF YOU WOULD LIKE TO INSTALL IT ABOVE GROUND YOU WILL NEED TO PURCHASE THE ASSOCIATED FRAME WORK. INCLUDED IN THIS PACKAGE IS A VERY LARGE FAN AND DUCT SYSTEM TO MOVE AIR ACROSS THE VEHICLE.

881) JIB CRANE, FLOOR MOUNTED WITH TROLLEY AND DAYTON 500LB WINCH..

882) ABS CRANKSHAFT RACK, THIS IS A NICE SIMPLE HEAVY DUTY CRANKSHAFT RACK WITH 2 SETS OF RAILS AND A STEEL SHELF ON THE TOP AND BOTTOM.

883) THIS IS ANOTHER STYLE OF LISTA CABINET WHICH IS COMPLETE WITH WIRED IN POWER STRIPS AND BUILT IN LIGHTING. AS WITH ALL THE LISTA WORK BENCHES IT HAS A BUTCHER BLOCK WOODEN TOP. THE CABINETS ARE A FOUR DRAWER 28" WIDE AND A FIVE DRAWER 22" WIDE.

884) LISTA STORAGE CABINET, THIS IS A 28-1/x28-1/2x44" CABINET WITH EIGHT GOOD SIZE DRAWERS AND A RUBBER MAT TOP COVER.

884A) LISTA STORAGE CABINET, THIS IS A 28-1/x28-1/2x44" CABINET WITH ELEVEN GOOD SIZE DRAWERS AND A RUBBER MAT TOP COVER.

884B) LISTA STORAGE CABINET, THIS IS A 28-1/x28-1/2x44" CABINET WITH EIGHT GOOD SIZE DRAWERS AND A RUBBER MAT TOP COVER.

885) BHJ PHEUMATIC ROD VISE. THIS IS A NICE TOOL TO HAVE AROUND AT THE SHOP IF YOU EVER FIND THE NEED TO BORE ANY ROD BUSHINGS. IT WILL HOLD THE ROD SECURELY WHILE CENTERING THE ROD FOR A GOOD REPEATABLE OVERALL LENGTH.

886) SUNNEN CRG750 CAP GRINDER. GOOD, FUNCTIONAL, CAP GRINDER WHICH IS EQUIPPED WITH THE MAIN CAP TABLE SO YOU CAN GRIND BOTH ROD CAPS AND MAIN CAPS.

887) LISTA WORK STATION WITH OVERHEAD CABINETS. THIS IS A NICE COMPLETE WOODEN TOPPED WORKSTATION WITH A BUTCHER BLOCK TOP 2 SETS OF DRAWERS AND 3 OVERHEAD CABINETS.

888) LISTA ROLL AROUND WOODEN TOPPED WORK STATION. A VERY NICE HEAVY DUTY WORK STATION WITH LOCKING WHEELS AND SIDE LOCK DRAWERS. THE TOP IS A THICK BUTCHER BLOCK WOOD WHICH IS GREAT TO WORK ON.

889) A MITUTOYO 0-6" MICROMETER SET COMPLETE WITH A SET OF STANDARDS. THIS IS A VERY NICE AS NEW SET THAT WAS ONLY USED IN THE ENGINE ASSEMBLY AREA.

890) HORIZONTAL/VERTICAL ROTARY TABLE 10" WITH 3 JAW CHUCK NEEDS MINOR REPAIR.

891) ABS CRANKSHAFT RACK, THIS IS A NICE SIMPLE HEAVY DUTY CRANKSHAFT RACK WITH 2 SETS OF RAILS AND A STEEL SHELF ON THE TOP AND BOTTOM.

892) A SUNNEN KKN-100 SQUARE HONING FIXTURE WITH A COMPLETE SET OF HONING RINGS AND MOUNTING BRACKETS FOR THE LBB-1660. THIS IS A VERY NICE SET UP IF YOU WANT TO MAKE SURE YOUR RODS ARE SQUARE AND ROUND.

893) PARTS SHELVES SECTION

894) PARTS SHELVES SECTION

895) PARTS SHELVES SECTION

896) PARTS SHELVES SECTION

897) PARTS SHELVES SECTION

898) PARTS SHELVES SECTION

899) PARTS SHELVES SECTION

900) THIS IS A VERY NICE HYSTER ELECTRIC FORKLIFT WITH SIDE SHIFT THAT IS COMPLETE WITH A CHARGING STATION. HAS A 2600lbs ON CENTER CAP. THE BATTERY PACK IS LESS THAN ONE YEAR OLD.

901) SUNNEN CF1126 BORE GAUGE SETTING FIXTURE 2-6". THIS FIXTURE IS IN EXCELLENT CONDITION AND COMPLETE WITH 2" THRU 5" STANDARDS.

902) COMPLETE BANK OF 12 PERSONAL LOCKERS. THERE ARE 6 UPPER AND 6 LOWER LOCKERS THAT ARE INTERCONNECTED AND IN GREAT SHAPE.